European Pharmaceutical Review

APRIL 4, 2024

Specifically, an additional four years of funding for the Advanced Therapy Treatment Centre (ATTC) Network is available through the programme. The funding will start with three established Centres, and then across an expanded network, according to Chief Clinical Officer for Cell and Gene Therapy Catapult, Jacqueline Barry.

Networking 82

Networking Training Recruitment Healthcare 82

Impetus Digital

JANUARY 30, 2023

Medications and supplies must be handled with the utmost care, often needing to comply with strict temperature regulations and changing demands from patients and providers that vary depending on the country. Add this to infrastructure challenges like cold storage or delays, and it’s no wonder patient needs are not always put first.

Pharmaceutical 69

Pharmaceutical Patients Safety Distribution 69

European Pharmaceutical Review

DECEMBER 7, 2023

A report from the Advanced Therapies Treatment Centre (ATTC) Network has highlighted urgent need for rapid change and improvement in the field to maximise patient access to advanced therapies. It was compiled based on expertise gathered at the ATTC Network’s UK Advanced Therapies Adoption Challenge event in October.

Networking 81

Networking Medicine Leads Manufacturing 81

Legacy MEDSearch

MARCH 14, 2023

The report concluded that the Company’s UroShield device showed a decrease in the number of blockages and infections and an increase in catheter satisfaction in the patients studied. UroShield is available to all NHS clinicians and their patients who need the device with full clinical support, through the NHS supply chain.

Patients 98

Patients Medical Recruitment Management 98

European Pharmaceutical Review

APRIL 2, 2024

At Roche, we see it as our ethical and environmental responsibility to support the use of alternative methods that prioritise animal welfare while ensuring the safety of our patients and the quality of our products. However, for companies that manufacture globally marketed products, the journey towards implementing rFC is a slow one.

Ethics 86

Ethics Manufacturing Marketing Networking 86

Pharmaceutical Technology

MAY 18, 2023

Within the 14-page document , published by an EMA special task force, are 10 recommendations of best practices that “marketing authorisation holders, wholesalers, distributors, and manufacturers can consider adopting to ensure continuity of medicinal product supply and reduce the impact of shortages”.

Medicine 99

Medicine Specialization Networking Patients 99

Clarivate

MAY 14, 2024

While initially developed to help regulate blood sugar levels, they have also been found to promote appetite suppression, leading to weight loss in patients. What’s leading to the boom in development of semaglutide biosimilars? Per recent Clarivate estimates, the therapeutic market for these drugs is valued at approximately $1.7

Manufacturing 52

Manufacturing Marketing Leads Medicine 52

Pharmaceutical Technology

NOVEMBER 7, 2022

SHL Medical is a world-leading solutions provider for advanced drug delivery systems with a unified purpose to further enable patient independence. Currently, SHL Medical has four locations, in Switzerland, Taiwan, Sweden, and the US, with Taiwan being the main manufacturing location. Growing demand for patient independence.

Medical 52

Medical Patients Transportation Manufacturing 52

European Pharmaceutical Review

AUGUST 15, 2023

The exhibition, which will take place from 8-10 October 2024, is being hosted in Milan for the second time in three years in recognition of the massive pharmaceutical ingredients and manufacturing industry in the region. “We expect a large international attendance and will marry this with local and regional manufacturing insights.”

Manufacturing 87

Manufacturing Pharma Pharmaceutical Pharmaceutical research 87

PM360

SEPTEMBER 15, 2022

The term “patient centricity” has been around for over a decade, and since its first utterance the buzzword has been praised, dissected, criticized, and everything in between. The concept has always been worthwhile, but people within and outside of the industry have wondered whether the industry was truly becoming more patient centric?

Patients 98

Patients Healthcare Healthcare Marketing 98

Legacy MEDSearch

AUGUST 9, 2023

Heart disease continues to be a leading cause of death in the U.S. Given the risks associated with open heart surgeries, many patients delay treatment, unwittingly increasing their health risks as well as the chances they may be too weak later on for open heart surgery. claiming the lives of nearly 700,000 Americans each year.

Medical 52

Medical Patients Recruitment Engineering 52

pharmaphorum

OCTOBER 26, 2022

And just as a family business thrives on its connection to the community, Chiesi is committed to connecting to the global patient community. We try to have a very long-term orientation because we believe that aligns our objectives very well with the objectives of society and the patients we serve, and it makes us a stable business.”.

Patients 72

Patients Pharma Consulting Transportation 72

European Pharmaceutical Review

AUGUST 31, 2023

Cancer patients critically depend on accurate diagnosis and disease treatment. By reaching cancer cells that have already spread throughout the body, a targeted radiopharmaceutical treatment offers an alternative for patients with advanced cancer when standard lines of treatment, such as chemotherapy, have failed.

Food and Drug Administration 76

Food and Drug Administration Manufacturing Safety Transportation 76

Pharmaceutical Technology

APRIL 27, 2023

With multi-product, in-house viral vector production capabilities, the new facility in Libertyville, Illinois, US, is expected to strengthen the company’s long-term viral vector supply and advance its long-term goals and global manufacturing network in cell therapy. The new facility will be handed over to Bristol Myers Squibb in 2023.

Engineering 52

Engineering Manufacturing Networking Medicine 52

pharmaphorum

OCTOBER 12, 2022

By remaining compliant, medicines are manufactured in line with their pre-defined and approved specifications, in order to ensure the delivery of safe and effective products to consumers. So, with mandates in place, how do manufacturing facilities meet these compliance goals? The dominion of data. Cybersecurity and non-conformance.

Manufacturing 83

Manufacturing Medicine Leads Distribution 83

Legacy MEDSearch

APRIL 7, 2023

The Axiom PSR (patient-specific resection) System is additively manufactured from titanium alloy, making it the first all-metal, patient-specific instrument system cleared for use with an ankle arthroplasty system. The system’s streamlined design features are focused to reduce operative time during total ankle surgeries.

FDA 52

FDA Patients Food and Drug Administration Recruitment 52

Legacy MEDSearch

NOVEMBER 28, 2022

Trauma/ER: The BodyTom 64’s unique combination of internal lead shielding and battery operation allows any standard trauma bay to be transformed into an advanced CT imaging suite. The BodyTom 64 brings the power of innovative imaging to patients’ bedsides safely and efficiently. NeuroLogica Corp.,

FDA 92

FDA Food and Drug Administration Electronics Recruitment 92

PM360

JULY 13, 2023

Each prescription medication a patient takes is a responsibility, and when an individual is taking five or more medications, those responsibilities become a complicated puzzle of elements to manage, such as proper dosage, compliance and adherence, potential drug interactions, and the correct time and method for use. 3 They are also 2.6

Prescription 52

Prescription Medical Physicians Education 52

PM360

OCTOBER 28, 2022

Two of ZS’ major studies suggest that the trend towards more advanced KAM strategies and capabilities will continue to accelerate for pharma manufacturers. How should leading pharma companies respond? Consolidation among providers continues unabated, leading to larger and larger health systems. healthcare ecosystem.

Key account management 117

Key account management Pharma Management Pharma sales reps 117

PM360

OCTOBER 3, 2023

Director US Marketing and Patient Engagement, argenx US, Inc. Diversity/Multicultural: Anna Czene, Vice President, Corporate Communications & DEI Lead, CareDx, Inc. Founder and CEO, ConcentricLife MARKETER OF THE YEAR Conor Fogarty, Marketing Director, Neuroimmunology Franchise, Genentech, Inc. Cardiology: Bradley A.

Education 122

Education Marketing Media Management 122

European Pharmaceutical Review

JULY 21, 2023

Manufacturing delays and capacity issues that continue to impact the pharmaceutical supply chain have led to medicine shortages around the globe; an issue that has been exacerbated further by geopolitical events, the energy crisis and rising inflation. What are the top three supply-related challenges facing pharmaceutical manufacturers?

Pharmaceutical 93

Pharmaceutical Food and Drug Administration Transportation Manufacturing 93

Pharmaceutical Technology

MAY 17, 2023

AGC Biologics has introduced the BravoAAV and ProntoLVV viral vector platforms that offer quick clinical and commercial production and release of good manufacturing practices (GMP). Both platforms use the company’s development, manufacturing and analytical capabilities in lentiviral vector (LVV) and adeno-associated viral vector (AAV).

Manufacturing 52

Manufacturing Networking Patients Leads 52

PM360

OCTOBER 25, 2023

From the manufacturer perspective, payer policies and legislation on combination therapy pricing are impacting global development, pricing, access, and commercialization strategies. When 1+1 ≠ 2 In theory, combining two or more branded agents can lead to a price that exceeds SoC monotherapy. Certain markets (e.g.,

Food and Drug Administration 105

Food and Drug Administration Manufacturing Marketing Pharmaceutical manufacturing 105

Legacy MEDSearch

DECEMBER 1, 2022

HemoSonics, LLC , a leading medical device company delivering individualized diagnostic solutions for Patient Blood Management (PBM), announced that it has received 510(k) market clearance from the U.S. “Point-of-care data is the answer to PBM-guided patient decisions. market today.

FDA 95

FDA Food and Drug Administration Recruitment Medical 95

pharmaphorum

JANUARY 30, 2023

On top of this, the developing integration of automation and robotics into the manufacturing pipeline, as well as the increased need for more rapid microbiology methods brought about in part by the surge in ATMPs, are all highlighting the necessity of the field in Pharma.

Pharmaceutical 52

Pharmaceutical Manufacturing Networking Pharma 52

Pharmaceutical Technology

JUNE 29, 2022

For hundreds of years, we have found myriad uses for microbial enzymes in manufacturing – from food, drink, and household products to a range of industrial applications. Continuing advancements within this field deliver new hope to doctors and patients, transforming disease outcomes for previously incurable indications.

Specialization 118

Specialization Biopharma B2B Sales Manufacturing 118

European Pharmaceutical Review

JUNE 27, 2023

Hervé Affagard (HA): Developing microbiome therapeutics as well as every other new therapeutic modality comes with several challenges that need to be addressed carefully to ensure patient safety and maximise the potential benefits of these treatments. The sheer volume of microbiome studies is another key trend.

Food and Drug Administration 96

Food and Drug Administration Manufacturing Medicine Pharma 96

Pharmaceutical Technology

JANUARY 11, 2023

The acquisition will help the company enhance its research collaborators network globally and expand its footprint in hubs across the US, Africa, Europe, and the Middle East. InstaDeep will operate as BioNTech’s UK subsidiary and lead the growing portfolio of AI and ML initiatives at BioNTech after the deal’s completion.

Transportation 69

Transportation Networking Manufacturing Leads 69

pharmaphorum

JANUARY 24, 2023

Energy crisis effects will be felt across healthcare, but for medicines manufacturing and delivery the issue is especially complex because the networks of medicine supply extend across the globe and across countries which see differing impacts of energy costs and supply. Medicines manufacturing is energy intensive.

Medicine 86

Medicine Healthcare Healthcare Pharma 86

Pharma Marketing Network

JANUARY 12, 2023

Advancing medicine, advancing patient care, and advancing equity in our global workforce are shared values of this year’s honorees driving transformational change and impact,” said Wendy White, interim CEO and 2022 STAR, HBA. These experiences have empowered Christi to become a leading industry voice advocating fiercely for patients.

Healthcare 52

Healthcare Healthcare Networking Manufacturing 52

Legacy MEDSearch

JULY 31, 2023

This achievement is the second FDA clearance Axial3D has received for its segmentation platform, INSIGHT , and a significant milestone for the healthcare industry in its embrace of automation and artificial intelligence to personalize patient care. Stratasys Ltd.

Medical 52

Medical FDA Healthcare Provider Healthcare 52

Pharmaceutical Technology

JULY 18, 2022

A lead product of Quoin, QRX003 is a topical lotion intended to treat Netherton Syndrome. Under the supply deal, Quoin is entitled for manufacturing and supplying QRX003 to Endo.

Distribution 64

Distribution Marketing Networking Pharmaceutical 64

PM360

JULY 13, 2023

However, due to conjugation instability and unfavorable safety profiles of currently available ADCs, we can still do more to ensure ADCs are more broadly available and amenable options for the patients who need them. Cellectis is pioneering the concept of off-the-shelf and ready-to-use gene-edited CAR T-cells to treat cancer patients.

Patients 98

Patients Engineering Side effects Leads 98

Legacy MEDSearch

MAY 23, 2023

Cartessa Aesthetics and its manufacturing partner, DEKA, have been at the forefront of skin resurfacing innovation in North America and today introduces the newest resurfacing innovation HELIX – advanced fractional ablative CO2 and non-ablative technologies in one device. DEKA is a worldwide leading manufacturer of laser technology.

Recruitment 52

Recruitment Side effects Physicians Manufacturing 52

Pharmaceutical Technology

MARCH 27, 2023

It intends to use a part of the financing to implement innovative manufacturing platforms and technologies which help in increasing the vaccine supply speed, strengthening the domestic supply chain, and reducing cost. Cell & Gene Therapy coverage on Pharmaceutical Technology is supported by Cytiva.

Manufacturing 52

Manufacturing Government Competition Networking 52

European Pharmaceutical Review

MARCH 12, 2024

They are enforcing stricter regulations and guidelines to ensure that the data generated throughout the lifecycle of pharmaceutical products, from R&D to manufacturing and distribution, is reliable, accurate and consistent. Use of advanced technologies. What is the greatest current challenge in maintaining data integrity?

Government 86

Government Pharma Ethics Training 86

PM360

JUNE 16, 2023

3 Lori Wood, Senior Principal at Valuate Health Consultancy and facilitator of the working group noted that “as a manufacturer, you can’t ask the payer what they recommend. the global model for high-cost rare disease therapies already mandates that manufacturers offer a mix of innovative pricing and access arrangements. In the U.S.,

Marketing 98

Marketing Management Insurance Specialization 98